Provide a human-readable prompt for code recognition failure, instead of just reporting a channel error.

· AI Box

Provide a human-readable prompt for code recognition failure, instead of just reporting a channel error.

Mixed use of encodings is common on-site. Failure prompt indicates that the encoding is not supported and provides conversion suggestions。

Background and objectives

H.265 Camera connection failed, but only a channel error was reported, making troubleshooting difficult.「AIBox Encoding Failure Prompt」It is more reliable to write it as a checklist: prerequisites, operating procedures, acceptance criteria, and the location where evidence is stored. It is less troublesome for after-sales to follow the checklist than to undergo repeated verbal training. Most rework is not due to algorithms suddenly deteriorating overnight, but rather because bracket tolerances, module batches, or configurations were rolled back and no one took note of it. When encountered,「AIBox Encoding Failure Prompt」For related complaints, first reproduce the issue following the same path, then adjust the parameters. When verifying on-site, record the device number, software package number, and the illuminance or vehicle speed/pedestrian flow at the time, and retain a video segment of no less than 8 seconds.。

Key Points for Implementation

Automatic encoding recognition; failure prompt and conversion recommendation. Both types of encoding can produce a box when connected to a single line. Sampling inspections can be conducted once every 6 units, with no less than 15% of each batch being inspected. After nonconforming rework, evidence must be re-collected, and the old documents must be retained for comparison. Direct overwriting is prohibited. A control sample must be run for any change in hardware batch, driver, ISP/calibration package, or platform configuration. Do not go to the customer's site with a version that does not have a reference record. If the conditions change, follow「AIBox Encoding Failure Prompt」The original path is re-measured, and the new and old results are saved side by side for easy reconciliation in the future.。

Acceptance Recommendations

The log records the detected encoding type. At least one set of controls should be kept for night and day, fully loaded and unloaded, dry and slippery conditions to avoid signing off only under ideal conditions. Clearly specify the division of responsibilities during the handover: The integrator is responsible for installation and joint commissioning, while the AI box side provides the baseline package and qualification criteria. Standardize terminology to avoid miscommunication between the parties. The handover and maintenance list should include the inspector, date, version number, and sample image/video path. Only sign off once playback is possible and the information can be verified. Before signing, confirm that the evidence can be opened and that the version numbers match, to avoid leaving only verbal conclusions. The Help Center can use the same set of prompts.Case. On site.「AIBox Encoding Failure Prompt」First, clearly describe the phenomenon: under what lighting/vehicle speed/pedestrian flow conditions it occurs, how long it lasts, and take photos or record short videos on site for documentation. In AI box projects, verbal agreements can easily become misaligned after shift changes. Perform a comparison before mass production or handover for maintenance: compare the new and old versions side by side on the same route and in the same scenario. If the deviation exceeds the limit, stop the release; do not approve it based on a "it seems about the same" feeling. When the same issue occurs again, first retrieve the previous「AIBox Encoding Failure Prompt」as a reference, and then decide whether to change the parameters。

Need help evaluating programs?

Explain that the platform and the scenario, along with the AI box, can be jointly scheduled for integration and delivery.

← Back to News List